CNIBAO MAC-R series 19.8mm sealed micro switch IP67 waterproof push switch 5A 250VAC D2SW
Feature:
• Designed for Waterproof IP67
• Small Compact Size
• Long Life and High Reliability
• Offer Variety Levers
• Complete Variety of Wiring Terminal
• Various Dimensions Satisfy Different Installation Requirements
Application:
• Car
• Air-Conditioner
• Communication
• Home Appliance
• Motor Control
• Sharing Device
• Toys
• Charging Station
the micro switch is an external force that acts on the movable piece through the driving components (pressing pins, driving rods, etc.), and when the movable piece is displaced to the critical point, an instantaneous action occurs, so that the movable contact at the end of the movable piece is connected to the movable piece. Static contacts make or break quickly. When the force on the driving part is removed, the movable piece generates a reverse action force, and when the reverse stroke of the driving component reaches the action critical point of the movable piece, the reverse action is completed instantaneously.
MAC-R series is the most common type of micro switch in the market. The switch is 19.85mm L, 9.5mm H, and 6.4mm W. It can be installed through two positioning holes with a spacing of 9.5mm. The most advantage of this switch is cost-effectiveness. Compared with the waterproof micro switch of the same size, it has the lowest price. The original intention of its research and development is to be a low-end substitute for the mainstream waterproof micro switch in the market. Of course, if you need a higher quality switch of this size, please look our company's MAF-R series.
Although it's a product for the mid-low-end market, please rest assured that its waterproofness fully meets the IP67 standard. In addition to the price advantage, its other advantage is that the output is large and the delivery time for purchasing this switch will be shorter.
Of course, it also has some unavoidable shortcomings. The first is the rated load of the switch. We recommend that the load of the switch should be below 3A 250VA for the best siutation, and the maximum current should not exceed 5A. The second is the single selection of the switch's levers and the terminals. There is only one type of switch's terminal and there are only three types of levers: straight,arcuate,bending. Of course, we also provide paid customized services.
Finally, in terms of product safety certification, the MAC-R series can only provide you with RoHS and REACH environmental certification.
If you need a switch of this shape but need to be able to carry a larger current and voltage, or CQC, CE, UL and other certifications are a must for you, then please look at our MAF-R series which is compatible with a high-end product with a consistent size for the MAC-R.
Outline Drawing:
3D Display:
| Rating | 3(3)A 250VAC T125 5E4; 8(3)A 250VAC T125 1E4 | |
| Contact Resistance | ≥100mΩ(Without wire) | |
| Operating Temperature | 25T125 | |
| Operating Force | 130gf 200gf 300gf | |
| Hole For Mounting |  |
|
| service life | Electrical | 10,000 & 50,000 Cycles |
| Mechanical | ≥100,000 Cycles | |
Why Choose Us
We are contributing a better value!On the basis of comprehensive quality management,We continuously improve the quality and efficiency of team work.Strengthen the cooperation with customers and suppliers, and promote each other.Keep improving on the product quality and cost.Offer a better solution and support for customers.
★ Keep Improving
★ Superior Quality
★ Continuous Improvement
★ Pursuit of Excellence
Patents
All products are guaranteed to be patented or free from patent disputes.
Production Capacity
There are more than 300 automatic production equipment, which can meet the annual output of 120 million switches and more than 1 billion sets of micro-motor accessories.
Provide Support
Provide technical guidance and technical training support.
R&D Department
The R&D team has 121 people, who can independently complete the comprehensive development process from customer demand research, product concept formation, product design, mold design and development, production automation, etc.
Quality Assurance
All process operations are operated by our company Tongda OA wizard, ERP system, and Moqibao. The whole process needs to be approved and can be held accountable. Automatic production is equipped with CCD inspection, with a quality team of 65 people and more than 20 types of inspection equipment. There are more than 220 units in total, and the shipment needs to be fully inspected by QC and a shipment inspection report will be issued.
Modern Production Chain
advanced automated production workshop, stamping, injection molding workshop, production assembly workshop, silk screen printing workshop, machining workshop, etc.
Product Research and Development
IBAO has a team of highly-educated and high professional competence staff.We can complete the development process independently covering research on customer demand,product concept formation, product design, mold design and development,automation equipment design and development and so on .We can also help customer solve the technical issues in production process and quality issues.
Injection Workshop
Total 35 injection machine(20T-150T)
